Material Number For Valve System; Identification Key For Bus Coupler; Equipment Identification For Bus Coupler - Aventics DeviceNet Description Du Système Et Notice D'emploi

46
1
4
AVENTICS | Bus Coupler AES/Valve Driver AV, DeviceNet | R412018138–BAL–001–AC
12.3.2

Material number for valve system

The material number for the complete valve system (46) is printed on the right end plate. You can
use this material number to reorder an identically configured valve system.
Note that, after a valve system conversion, the material number still refers to the original
configuration (see section 12.5.5 "Conversion documentation" on page 120).
12.3.3

Identification key for bus coupler

The identification key (1) on the top of the AES series bus coupler for DeviceNet is "AES-D-BC-DEV"
and describes the unit's main characteristics:
Table 25: Meaning of the identification key
Designation
AES
D
BC
DEV
12.3.4

Equipment identification for bus coupler

The bus coupler requires a unique ID to enable the clear identification of the unit within the system.
The two equipment identification fields (4) on the top and front of the bus coupler are available
for this purpose.
Label the two fields as shown in your system diagram.
Meaning
Module from the AES series
D design
Bus Coupler
For DeviceNet fieldbus protocol
113
Conversion of the Valve System