Rimessaggio Per Lunghi Periodi; Prolonged Inactivity - Benelli Pepe Manuel D'utilisateur

Masquer les pouces Voir aussi pour Pepe:
Table des Matières

Publicité

RIMESSAGGIO PER LUNGHI PERIODI

PROLONGED INACTIVITY

REMISAGE DE LONGUE DURÉE
LÁNGERES STILLEGEN
INACTIVIDAD POR LARGO TIEMPO
66
USO DELLO SCOOTER
RIMESSAGGIO PER LUNGHI PERIODI
Prima di un lungo periodo di fermo dello scooter, ti
consigliamo di eseguire le seguenti operazioni:
• Lava accuratamente lo scooter
• Vuota il serbatoio del carburante
• Lubrifica il gruppo cilindro-pistone togliendo la candela,
versando circa 20 cm3 di olio per miscela e azionando il
pedale di avviamento manuale per far effettuare alcune cor-
se al pistone; rimonta la candela alla fine dell'
operazione.
• Togli la batteria e riponila in un luogo asciutto.
• Copri lo scooter con un telo.
RIPRISTINO DOPO LUNGO INUTILIZZO
• Verifica l'eventuale presenza di macchie sotto lo
scooter, sintomo di eventuali perdite di liquidi. Nel caso,
rivolgiti ad un Concessionario o Officina Autorizzata
Benelli per i controlli necessari.
• Lava lo scooter.
• Rimonta la batteria dopo averne verificato la
carica ed eventualmente ripristinato il livello dell'elettrolito.
• Rifornisci con carburante nuovo.
• Verifica il livello dell'olio motore.
OPERATION
PROLONGED INACTIVITY
Before leaving the vehicle inactive for a long period, it is
advisable to carry out the following operations:
• Carefully wash the scooter.
• Empty the fuel tank.
• Lubricate the cylinder-piston assembly by removing the
spark plug, pouring in approx. 20 cm3 ol mixture oil and
cranking the engine a few times with the kick-start.
Replace the spark plug at the end of the operation.
• Remove the battery and store it in a dry place.
• Protect the scooter with a dust cover.
RESTORING THE VEHICLE TO NORMAL OPERATION AFTER
PROLONGED INACTIVITY
• Check for the presence of spots denoting leakage
under the vehicle. If necessary, have the vehicle checked
by a Benelli Dealer or Authorized Workshop.
• Wash the vehicle.
• Reinstall the battery after checking its charge and, if
necessary, restored the electrolyte level.
• Refuel.
• Check the engine oil level.

Publicité

Table des Matières
loading

Table des Matières