Inserting The Suction/Irrigation Set - WORLD OF MEDICINE PP110 Mode D'emploi

5.6

Inserting the Suction/Irrigation Set

(1)
(3)
(7)
(15)
(14)
The suction/irrigation tube set is available as a single use tube set (see chapter
12 Accessory list).
The tube set consists of two spikes provided with protective caps that are con-
nected to the tube clamp (3) and the Y-connector (4) by a connecting piece. This
connects the supply part with the irrigation tube (5) connected to the roller tube
(6) by a ring. The instrument tube (8) is located on the pressure chamber with
membrane and transponder (7).
(16)
(17)
In order to separate sterile from non-sterile areas, assign the following tasks to
the "sterile" or "non-sterile" nurse or medical technician. The indicated numbers
refer to the Fig. 5-6 "Elements of the suction/irrigation tube set" and Fig. 5-7 "In-
serting the suction/irrigation set".
S
I
(2)
(3)
Fig. 5-6
(2)
Protective caps
(1)
Spikes
(2)
(3) Tube clamps
Y-connector
(4)
(4)
Irrigation tube
(5)
Roller tube
(6)
(5)
Pressure chamber with mem-
(7)
brane and transponder
Instrument tube
(8)
(6) Suction valve (blue)
(9)
Irrigation valve (white)
(10)
Suction and irrigation pipe
(11)
(8)
Trumpet valve
(12)
(9)
Suction and irrigation instrument
(13)
(10)
(14) Suction tube
(11)
(12)
Connection to the suction con-
(15)
tainer
(13)
Fig. 5-7
(15)
Spikes
(2)
Tube clamps
(3)
(5)
Irrigation tube
(5)
Roller tube
(6)
(6)
Pressure chamber with mem-
(7)
brane and transponder
(8)
Instrument tube
(8)
(9)
Suction and irrigation instrument
(13)
(13)
Fluid bag
(15)
Tube retainer
(16)
Suction container
(17)
Operating the Device
Elements of the suction/irriga-
tion tube set
Inserting the suction/irrigation
set
21
en