Publicité
Les langues disponibles
Les langues disponibles
User manual
The function values:
TIME
SPEED / RPM
DISTANCE
CALORIES (CAL)
PULSE
WATT
LOAD
How do I exercise?
After switching on the computer you can choose an user identification by pressing the Up/Down
buttons, for example U1 for User 1 and so on (up to U4). Confirm this selection with "Mode".
Hint: If this input is not possible after switching on the computer, you may press and hold "RESET"
to get into this dialogue.
After selecting the user-id you have to input your personal data by pressing „UP" and „DOWN" and
"MODE" for confirmation as follows:
Computer shows actual exercise time (max. 99:59 Min).
Preset a target time
You may preset a target time before starting a workout. The time will
then count down and multiple sound beeps will be emitted when
reaching 0:00.
The computer shows the current speed in the display (0-99.9 km/h).
In combination with the speed display the rounds per minute (RPM)
will be displayed (alternating display speed/RPM not available for all
models)
The workout distance is displayed here (max. 99,90 km).
Preset a target distance
You may preset a target distance before starting a workout. The
Distance will then count down and multiple sound beeps will be emitted
When reaching 0,00.
The currently burned calories are displayed here (max. 9990 kcal).
Preset a target calorie consumption
You may preset a target calorie consumption (kcal) before starting a
workout. The calories will then count down and multiple sound beeps
will be emitted when reaching 0000 kcal.
The computer is showing the user's heart rate in beats per minute.
For a correct display please ensure that you fully grasp the hand
sensors. It may last up to 2 minutes before the pulse frequency
will be measured correctly.
Preset a target pulse
This is only possible in special modes – please check the respective
chapter.
The computer shows the current watt value (10-350 Watt)
The computer displays the current resistance level setting
(not for all models).
48
Publicité
