Marking The Fixing Holes For The Drive Unit - GILGEN ASL-S Instructions D'installation Et D'utilisation

X
55
Note:
Drive unit position in function of measure A (distance between X-axis and ceiling)
A = 100 up to 290 mm:
Ceiling installation with standard fixing set
A = 290 up to 535 mm:
Ceiling installation with BEFSET-300 or directly onto wall bracket Art. No. 0602-326
A > 535 mm:
Installation only possible by means of a wall bracket
- Fasten the door driver directly on the door, using the hexagon head cap screws M8 (Tubtara riveting nuts are
included in the delivery) or weld the welding plate onto the door.
2.4.3

Marking the fixing holes for the drive unit

A) Single-winged doors
Mark the boreholes (61) and (63). Fig. 21
* Additional suspension if measure B exceeds 3'500 mm
0602-999-11c_2008.09.p65
Y
X
55
Y
=
600 - 750
63
21
0602-999/11c
B
=
62 * 61
mark the borehole (62).
ASL-S
15-40
Y
X X
Y
450
Fig. 20
Fig. 21