Mounting The Spare Parts; List Of Spare Parts - GILGEN ASL-S Instructions D'installation Et D'utilisation

Checking the GU locking mechanism
- While the door is closed and the brake released, check the position and the play of the locking latch.
Note:
In the CLOSED position it should be possible to move the door by approx. 2 to 5 mm
between the CLOSED position stop piece and the locking latch.
If necessary shift the locking latch.
4.3

Mounting the spare parts

4.3.1

List of spare parts

This list includes the most important spare parts. For detailed information, please refer to the spare parts catalogue.
Designation
ASL drive unit
- Hood
- Sealing profile, length 539 mm
- Sealing profile, length 263 mm
- ASL motor unit
- Spring pressure brake complete with guide sleeve
- Brake lining
- Pressure spring 28,5 x 9 x 1 for brake release mechanism
- Brake release switch
- Toothed belt HTD 804-3M-15 (1st gear reduction)
- Toothed belt GT-3MR-540-15 (2nd gear reduction)
- Control unit complete
- Control unit ASL-NETZ
- Transformer
- Printed encoder circuit board
- Fuse 10 AT ø5 x 20
- Fuse 3,15 AT ø5 x 20
R20 transmission system (accessories)
- Toothed belt HTD8M-20
- Toothed belt wheel t = 22
- Return bearing complete
- Toothed belt pulley t = 22 with ball-bearings
V60 transmission system
- Chain pinion on ASL drive unit
- Chain 1/2" x 5/16" (specify length)
- Chain joint 1/2" x 5/16"
- Driver chain link
V80 transmission syste,
- Chain pinion on ASL drive unit
- Chain 1/2" x 5/16" (specify length)
- Chain joint 1/2" x 5/16"
0602-999-11c_2008.09.p65
0602-999/11c
ASL-S
35-40
Art. no.
0602-330/01
0602-513
0602-544/01
0602-544/02
0602-351
4640-104/97
4499-008
4250-509
6448-001
4527-508
4527-507
0602-355/98
0350-232/00
0552-239
0350-208/00
6700-070/41
6700-062/42
4527-203
0602-409
0602-337
0602-365
0602-564
4510-104
4510-404
0552-151
0602-564
4510-104
4510-404
Tab. 4