Ambu aScope 4 Broncho Serie Mode D'emploi page 7

2.3. aScope 4 Broncho parts
No. Part
1 Handle
2 Control lever
3 Working channel port
- Working channel
4 Suction connector
5 Suction button
6 Tube connection
7 Insertion cord
Insertion portion
8 Bending section
9 Distal tip
10 Connector on
endoscope cable
11 Endoscope cable
12 Protection pipe
13 Introducer
14 Handle protection
1
3
5
4
14
6
12
7
8
9
Function
Suitable for left and right hand.
Moves the distal tip up or down in a single plane.
Allows for instillation of fluids and insertion of
endoscopic accessories.
Can be used for instillation of fluids, suction and
insertion of endoscopic accessories.
Allows for connection of suction tubing.
Activates suction when pressed down.
Allows for fixation of tubes with standard connector
during procedure.
Flexible airway insertion cord.
Same as insertion cord.
Manoeuvrable part.
Contains the camera, light source (two LEDs),
as well as the working channel exit.
Connects to blue socket on displaying unit.
Transmits the image signal to the displaying unit.
Protects the insertion cord during transport and storage.
Remove before use.
To facilitate introduction of Luer Lock syringes and soft
endoscopic accessories through the working channel.
Protects the suction connector during transport
and storage. Remove before use.
2
11
10
13
7