Nanosonics trophon 2 Mode D'emploi page 20

Products that are AcuTrace-compatible have this symbol on the outer packaging:
This symbol cannot be read by the AcuTrace reader.
The following products are compatible with AcuTrace:
trophon AcuTrace Operator Card
The trophon AcuTrace Operator Card links the HLD cycle to the operator responsible for the workflow.
For example, the screen of the trophon2 device prompts the operator to scan their Operator Card against
the AcuTrace reader when preparing a probe for disinfection and at the completion of disinfection cycle.
When scanning the Operator Card, ensure it is kept still against the AcuTrace reader, until
the trophon2 device acknowledges that the card has been read.
Refer to the trophon2 Installation Guide for further information on how to program a trophon AcuTrace
Operator Card.
Following is a summary of the information fields stored for each operator in their Operator Card.
Field name
Operator name
Operator ID
Other
When programming trophon AcuTrace Operator Cards, the operator can choose to use their personal
information or any other coded identifier (e.g. employee number). If personal information is used, please
see Appendix 4: trophon2 Device Accessories for privacy policy details.
trophon AcuTrace Medical Instrument Tag
The trophon AcuTrace Medical Instrument Tag stores probe identification information. While
programming the Medical Instrument Tag, the operator must input a 'Probe name'. The operator is also
required to input the medical instrument 'Serial number'. Attach the trophon AcuTrace Medical
Instrument Tag at a distance from the probe that will not interfere with patient examinations or closing
of the door of the trophon2 device. Operators scan the Medical Instrument Tag on the AcuTrace reader
when prompted by an onscreen message, prior to HLD, to link the HLD cycle to the probe.
When scanning the Medical Instrument Tag, ensure it is kept still against the AcuTrace
reader, until the trophon2 device acknowledges that the tag has been read.
Refer to the trophon2 Installation Guide for further information on how to program a trophon AcuTrace
Medical Instrument Tag.
Following is a summary of the information fields stored for medical instruments.
Field name
Probe name
Serial number
Other
trophon Chemical Indicator and trophon NanoNebulant
The trophon Chemical Indicator carton and trophon NanoNebulant cartridge can be scanned by the
AcuTrace reader to track batch and expiry dates of these products.
Refer to each product IFU for more information on its AcuTrace capability and how to program.
Size Recommended or example use
25 characters Operator name, operator initials,
operator unique ID
20 characters For example, internal staff ID number
10 characters For example, department
Size Recommended or example use
25 characters Probe model description
20 characters Probe serial number
(Required for trophon2 Software
Version 1.3.10.2 onwards)
10 characters Department, manufacturer or both
20
L03082 4.0 01/2023