Publicité
Les langues disponibles
Les langues disponibles
B2.4 Warm-up Cycle
1.
The warm-up cycle prepares the trophon2 device for operation and will begin automatically when
the device is powered on.
2.
The screen message will indicate when the trophon2 device is ready for use. Follow the onscreen
instructions.
B2.5 Touch Screen
The trophon2 device is operated using the touch screen User Interface (UI).
NOTE: The UI can be operated with gloves.
Cleaning the Touch Screen of the trophon2 Device
The screen can be wiped clean using a soft, non-abrasive, low-lint or lint-free cloth or wipe.
B2.6 Basic Settings
In general, to access settings on the trophon2 device:
1.
Select Menu
2.
Select the required setting and follow the onscreen prompts.
The available settings are:
Sleep timer:
The default inactive period until the trophon2 device enters sleep mode is two hours, which can be
adjusted in this setting or switched off. For details, see C3.8 Sleep Mode.
Language
Choose appropriate language for your region.
Date, Time
You can set the time and date manually.
To set the date and time, select Menu
Within these menus, the following settings require inputs: Region, Timezone, Date, Date Format, Time,
Time Format. It is important to set these settings accurately to ensure the accuracy of the disinfection
traceability records.
The trophon2 device will ask you to set the timezone, and then the time. The device will update the time
when daylight saving time (DST) starts and ends according to the timezone set.
NOTE: It is important to ensure the correct timezone is set in order for the DST to update correctly.
The device can be configured to automatically synchronise date and time to a time server using Network
Time Protocol (NTP). To enable this:
Consult your facility's IT administrator or network parameters expert and obtain network settings
1.
for a time server.
2.
Be sure your trophon2 device is connected to the Internet, normally via your local network. See
Network definition below.
3.
Select Menu
Set the timezone and select NEXT.
NOTE: It is important to ensure the correct timezone is set in order for the DST to update correctly.
4.
Select Set automatically ON and enter the settings for your time server.
Settings.
Settings
Settings
Date and Time.
L03082 4.0 01/2023
Date and Time.
17
Publicité
