Berkel 17074-0 Instructions Sur Le Fonctionnement page 28

DESCRIPTION OF CONTROLS AND FUNCTION
4
(2A) LED ON - GREEN, it is activated when the Handles (1) are in the START position.
(2B) LED SEAL – Flashing RED when Sealing.
(2C) Progress Display – Indicates the air extraction phases during the packing cycle.
(2D) Auto Vacuum & Seal Button – Start button for the automatic bag packing cycle, including final
sealing.
(2E) Canister Button – Start button for the automatic cycle for canisters and original accessories.
(2F) Marinating Button – Start button for the special "Rapid Marinating" cycle.
(2G) Vacuum Button – Start button for the manual cycle; the machine will continue to extract air
until manual sealing is performed using the "Seal" button (2H).
(2H) Seal Button – Start button for manual Sealing.
(2I) CANCEL Button – Stops the machine at any time.
(2L) Sealing Mode RED LEDs – indicate the sealing mode selected.
(2M) Sealing Mode Button – Selects from the 3 sealing modes.
(2N) Pump Speed Button – Selects from the 2 Pump Speeds.
(2O) Pump Speed BLUE LEDs – indicate the Pump speed selected.
(4) ACCESSORY PORT – Air intake for inserting the Tube in order to vacuum pack Canisters and
original accessories.
2C 2D
2A 2B 2G
28
2E 2F 2O 2N
2H 2I 2L 2M