Berkel 17074-0 Instructions Sur Le Fonctionnement page 27

(1) Hook System - To lock and unlock the bag insertion area, allowing for the packing cycle to
be executed in automatic mode and freeing the operator for other activities. The system is
controlled by two Handles (1), which rotate in three predefined positions to open (OPEN) -
close (STORAGE) and activate the machine (START).
(2) Control panel - To set the various functions of the machine (see paragraph: DESCRIPTION OF
CONTROLS AND FUNCTIONS).
(3) Lit Window - Solution that allows the user to see the correct positioning of the bag in the
vacuum Chamber.
(4) Air intake for the Tube (ACCESSORY PORT) - To insert the Tube to perform vacuum packing
in all canisters and original accessories.
(5) Cover - Open in the upper fixed position, it allows for bags to be positioned before proceeding
with packing.
(6) Sealing bar - Heating element which seals the bag.
(7) Airtight gasket - Guarantees the vacuum in the chamber allowing for air to be evacuated from
the bags.
(8) Vacuum chamber - Is the location for positioning the bag and evacuating the air.
(9) Sealing gasket - Presses the bag on the Sealing Bar.
(10) Removable Tray - Solution that allows the Vacuum Chamber to be washed in the dishwasher
for maximum hygiene.
(11) Roll-Holder Compartment
(12) Roll-Holder Compartment Cover - It protects the roll from possible soiling during the packing
phases.
(13) Bag Cutter - Can be used in both directions.
(14) Anti-skid Feet - Prevent the machine from sliding during use.
(15) Accessory Compartment - Compartment for storing the Cutter (19) and the Canister Connection
Tube, located on the lower part of the machine.
(16) Canister Tube - This connects the machine to all of the original accessories.
(17) Power Cable - To connect the machine to power.
(18) Cable Compartment - Compartment for storing the Power Cable, located on the back of the
machine.
MACHINE PART NAMES
27