Siemens simovert masterdrives CBP/CBP2 Mode D'emploi page 96

05.2006
X480 - Digital inputs
and outputs
WARNING
X481 - Analog inputs
and outputs
Siemens AG 6SE7087-6NX84-0FF5
SIMOVERT MASTERDRIVES
The following connections are provided on the terminal strip:
♦ 3 digital inputs
♦ 4 bidirectional digital inputs/outputs
Terminal Designation
38 M
39 P24ext.
40 DI1
41 DI2
42 DI3
43 DIO1
44 DIO2
45 DIO3
46 DIO4
Connectable cross-section: 1.5 mm² (AWG 16)
The ground cables are protected by a reactor.
Terminal 46 is at the top when installed.
Table 5-3 Terminal assignment at connection X480
The external 24 V supply must be sized for the currents of the digital
outputs.
There are the following connections on the terminal strip:
♦ 1 analog input with differential signal which can be used as a current
input and as a voltage input
♦ 2 analog inputs (single-ended), which can also be used as digital
inputs
♦ 2 analog outputs
Terminal Designation
47 AO1
48 AO2
49 AOM
50 AI1P
51 AI1N
52 AI2
53 AI3
54 AIM
Connectable cross-section: 1.5 mm² (AWG 16)
The ground cables are protected by a reactor
Terminal 47 is at the top when installed.
Table 5-4 Terminal assignment at connection X481
Option boards
Significance
Ground digital
Ext. 24 V supply
Digital input 1
Digital input 2
Digital input 3
Digital input/output 1
Digital input/output 2
Digital input/output 3
Digital input/output 4
Significance
Analog output 1
Analog output 2
Ground analog output
Analog input 1 +
Analog input 1 -
Analog input 2
Analog input 3
Ground analog input
EB1 – Expansion Board 1
Range
0 V
+20 V ... +33 V
24 V, Ri = 4 kΩ
24 V, Ri = 4 kΩ
24 V, Ri = 4 kΩ
Input:
24 V, 4 kΩ
Output:
P24ext. - 2.5 V, 100 mA
Range
± 10 V, 5 mA
± 10 V, 5 mA
0 V
Voltage: ± 10 V, 40 kΩ
Current: ± 20 mA, 250 Ω
± 10 V, 40 kΩ
± 10 V, 40 kΩ
0 V
5-5