Connecting-Up; Connecting Simolink - Siemens simovert masterdrives CBP/CBP2 Mode D'emploi

SLB – SIMOLINK Board
4.4

Connecting-up

4.4.1

Connecting SIMOLINK

CAUTION
SIMOLINK
connection
Position and color
of the connections
4-4
The SLB optional board is provided with
♦ two connections for SIMOLINK and
♦ one connection for the external voltage supply
Two connections for the fiber-optic cables are available for SIMOLINK,
one input and one output respectively.
You must always connect SIMOLINK up to both connections.
If you confuse the two connections for signal input and signal output,
SIMOLINK cannot operate.
SIMOLINK is provided with its own input and its own output connection.
Fig. 4-3 Bus connection
The SIMOLINK input is located in the lower area of the optional board.
It is dark gray.
The SIMOLINK output is located above the SIMOLINK input. It is light
gray.
6SE7087-6NX84-0FF5
Option boards SIMOVERT MASTERDRIVES
05.2006
Siemens AG