Start-Up - Siemens simovert masterdrives CBP/CBP2 Mode D'emploi

CBC – Communication Board CAN-Bus
3.6

Start-up

3-4
LED Status
Red Flashing
Yellow Off
Green Continuous parameterization
Table 3-5 Fault display during parameterization
LED Status
Red Flashing
Yellow Continuous converter/inverter to
Green Off
Table 3-6 Fault display during parameterization
LED Status
Red Flashing
Yellow Flashing
Green Off
Table 3-7 Fault display during operation
After installation of the CBC optional board has been completed, an
automatic self-test will be carried out when the basic unit
(converter/inverter) is powered-up.
Afterwards, the new board may have to be logged in on the basic unit
and provided with a bus address. Please refer to the documentation on
the basic unit for further details in this respect.
Please refer to the Compendium for detailed start-up instructions with
complete parameterization.
Diagnostic information
CBC is waiting for the
converter/inverter to start
Diagnostic information
CBC is waiting for the
finish parameterization
Diagnostic information
No net data transfer via the CAN bus
e.g. bus connector withdrawn, EMC fault,
connections with incorrect polarity, node is not
being supplied with net data via the CAN bus.
6SE7087-6NX84-0FF5
Option boards
05.2006
Siemens AG
SIMOVERT MASTERDRIVES