Kollmorgen AKM 2G Manuel D'installation page 232

AKM2G Instructions | 7 Technical Data
7.3.5.1 AKM2G-33 Derates for Different Options
Note: Derate information is for general estimation only. For the most accurate information for your motor use the online
Performance Curve Generator located at
download at www.kollmorgen.com/sites/default/files/public_downloads/AKM2G%20Performance%20Curves_0.pdf
refer to Kollmorgen's Motioneering Software Tool at
support/technical/motioneering-online/.
De-rates are referenced to the Max Continuous Torque ΔT wdg. = 100°C
Options - No Brake
Resolver
Resolver/Seal
SFD
SFD/Seal
DSL
DSL/Seal
EnDat2.2
EnDat2.2/Seal
232 Kollmorgen | kdn.kollmorgen.com | August 2020
pcgh.kollmorgen.com
www.kollmorgen.com/en-us/service-and-
0 1000 2000
100.0% 96.1% 91.0% 85.6% 79.9% 73.7% 67.1% 60.1% 52.4%
99.8% 95.8% 90.6% 85.0% 79.1% 72.8% 66.1% 58.8% 50.8%
100.0% 96.1% 91.0% 85.6% 78.3% 70.3% 61.8% 52.6% 42.7%
99.8% 95.8% 90.6% 85.0% 77.3% 69.0% 60.1% 50.4% 39.8%
100.0% 96.1% 90.3% 83.0% 75.2% 66.8% 57.7% 47.8%
99.8% 95.8% 89.8% 82.3% 74.2% 65.4% 55.9% 45.4%
99.7% 94.3% 87.1% 79.4% 71.0% 62.0% 52.1%
99.5% 94.0% 86.6% 78.6% 69.9% 60.5% 50.0%
, the AKM2G Performance Curves document available for
Speed: RPM
3000 4000 5000
, or
6000 7000 8000