Kollmorgen AKM 2G Manuel D'installation page 209

7.2.8.1 AKM2G-24L Derates for Different Options
Note: Derate information is for general estimation only. For the most accurate information for your motor use the online
Performance Curve Generator located at
download at www.kollmorgen.com/sites/default/files/public_downloads/AKM2G%20Performance%20Curves_0.pdf
refer to Kollmorgen's Motioneering Software Tool at
support/technical/motioneering-online/.
De-rates are referenced to the Max Continuous Torque ΔT wdg. = 100°C
Options - No Brake
SFD
SFD/Seal
DSL
DSL/seal
EnDat2.2
EnDat2.2/Seal
pcgh.kollmorgen.com
www.kollmorgen.com/en-us/service-and-
0 1000 2000
100.0% 97.9% 95.2% 92.4% 89.4% 85.8% 81.7% 77.3% 72.6%
98.9% 96.8% 94.0% 91.1% 87.7% 83.6% 79.3% 74.6% 69.6%
100.0% 97.9% 95.2% 92.1% 88.5% 84.6% 80.4% 76.0% 71.3%
98.9% 96.8% 94.0% 90.5% 86.6% 82.5% 78.0% 73.3% 68.2%
94.5% 91.9% 88.3% 84.6% 80.5% 76.2% 71.5% 66.5% 61.0%
93.4% 90.5% 86.8% 82.8% 78.5% 73.9% 68.9% 63.4%
AKM2G Instructions | 7 Technical Data
, the AKM2G Performance Curves document available for
Speed: RPM
3000 4000 5000
Kollmorgen | kdn.kollmorgen.com | August 2020
, or
6000 7000 8000
209