Kollmorgen AKM 2G Manuel D'installation page 222

AKM2G Instructions | 7 Technical Data
7.3.3.1 AKM2G-32 Derates for Different Options
Note: Derate information is for general estimation only. For the most accurate information for your motor use the online
Performance Curve Generator located at
download at www.kollmorgen.com/sites/default/files/public_downloads/AKM2G%20Performance%20Curves_0.pdf
refer to Kollmorgen's Motioneering Software Tool at
support/technical/motioneering-online/.
De-rates are referenced to the Max Continuous Torque ΔT wdg. = 100°C
Options - No Brake
Resolver
Resolver/Seal
SFD
SFD/Seal
DSL
DSL/Seal
EnDat2.2
EnDat2.2/Seal
222 Kollmorgen | kdn.kollmorgen.com | August 2020
pcgh.kollmorgen.com
www.kollmorgen.com/en-us/service-and-
0 1000 2000
100.0% 97.3% 93.9% 90.5% 87.0% 83.6% 80.1% 76.7% 74.6%
99.7% 96.9% 93.3% 89.7% 86.1% 82.5% 78.9% 75.3% 73.1%
100.0% 97.3% 93.9% 90.5% 86.6% 81.9% 77.2% 72.7% 70.0%
99.7% 96.9% 93.3% 89.7% 85.6% 80.7% 75.8% 70.9% 68.1%
100.0% 97.3% 93.7% 88.8% 83.9% 79.0% 74.1% 69.3% 66.4%
99.7% 96.9% 93.1% 88.0% 82.9% 77.8% 72.6% 67.5% 64.4%
99.8% 95.8% 90.7% 85.6% 80.4% 75.1% 69.9% 64.7% 61.6%
99.5% 95.4% 90.1% 84.7% 79.3% 73.8% 68.3% 62.8% 59.5%
, the AKM2G Performance Curves document available for
Speed: RPM
3000 4000 5000
, or
6000 7000 8000