Kollmorgen AKM 2G Manuel D'installation page 217

7.3.2.1 AKM2G-31L Derates for Different Options
Note: Derate information is for general estimation only. For the most accurate information for your motor use the online
Performance Curve Generator located at
download at www.kollmorgen.com/sites/default/files/public_downloads/AKM2G%20Performance%20Curves_0.pdf
refer to Kollmorgen's Motioneering Software Tool at
support/technical/motioneering-online/.
De-rates are referenced to the Max Continuous Torque ΔT wdg. = 100°C
Options - No Brake
Resolver
Resolver/Seal
SFD
SFD/Seal
DSL
DSL/Seal
EnDat2.2
EnDat2.2/Seal
pcgh.kollmorgen.com
www.kollmorgen.com/en-us/service-and-
0 1000 2000
100.0% 98.2% 95.8% 93.3% 90.8% 88.1% 85.3% 82.5% 79.5%
99.5% 97.6% 95.0% 92.4% 89.7% 86.8% 83.9% 80.8% 77.7%
100.0% 98.2% 95.8% 93.3% 90.8% 87.3% 83.6% 79.9% 76.1%
99.5% 97.6% 95.0% 92.4% 89.6% 85.9% 82.0% 78.0% 74.0%
100.0% 98.2% 95.5% 92.0% 88.5% 84.8% 81.0% 77.1% 73.2%
99.5% 97.6% 94.7% 91.0% 87.3% 83.4% 79.3% 75.2% 71.0%
98.9% 96.2% 92.7% 89.1% 85.3% 81.5% 77.5% 73.4% 69.3%
98.4% 95.5% 91.9% 88.0% 84.1% 80.0% 75.7% 71.4% 66.9%
AKM2G Instructions | 7 Technical Data
, the AKM2G Performance Curves document available for
Speed: RPM
3000 4000 5000
Kollmorgen | kdn.kollmorgen.com | August 2020
, or
6000 7000 8000
217