Kollmorgen AKM 2G Manuel D'installation page 227

7.3.4.1 AKM2G-32L Derates for Different Options
Note: Derate information is for general estimation only. For the most accurate information for your motor use the online
Performance Curve Generator located at
download at www.kollmorgen.com/sites/default/files/public_downloads/AKM2G%20Performance%20Curves_0.pdf
refer to Kollmorgen's Motioneering Software Tool at
support/technical/motioneering-online/.
De-rates are referenced to the Max Continuous Torque ΔT wdg. = 100°C
Options - No Brake
Resolver
Resolver/Seal
SFD
SFD/Seal
DSL
DSL/Seal
EnDat2.2
EnDat2.2/Seal
pcgh.kollmorgen.com
www.kollmorgen.com/en-us/service-and-
0 1000 2000
100.0% 98.4% 94.5% 90.4% 86.3% 82.0% 77.7% 73.3% 68.8%
99.7% 98.0% 93.9% 89.7% 85.4% 81.0% 76.5% 71.9% 67.2%
100.0% 98.4% 94.5% 90.4% 85.2% 79.3% 73.3% 67.3% 61.4%
99.7% 98.0% 93.9% 89.7% 84.2% 78.1% 71.9% 65.6% 59.3%
100.0% 98.4% 94.0% 88.3% 82.4% 76.3% 70.1% 63.8% 57.5%
99.7% 98.0% 93.4% 87.5% 81.4% 75.0% 68.5% 61.9% 55.3%
100.0% 96.7% 90.9% 84.9% 78.7% 72.2% 65.6% 58.9% 52.2%
99.7% 96.3% 90.3% 84.1% 77.6% 70.9% 63.9% 56.9% 49.9%
AKM2G Instructions | 7 Technical Data
, the AKM2G Performance Curves document available for
Speed: RPM
3000 4000 5000
Kollmorgen | kdn.kollmorgen.com | August 2020
, or
6000 7000 8000
227