Before Assembly - Aventics ED07 Mode D'emploi

56 AVENTICS | ED07 | R41400766–BDL–001–AB
Assembling the ED07 pressure regulator
Risk due to incorrectly mounted device!
An incorrectly mounted device may result in uncontrolled movements that could damage
other system parts.
Make sure that the device is attached to a base plate that is securely fastened to the
machine or a mounting plate.
6.1

Before assembly:

Make sure the relevant system part is not under voltage or
pressure.
Let the ED07 pressure regulator acclimate itself for several
hours before installation, otherwise water may condense in the
housing.
NOTICE
Mount the base plate in a control cabinet or on a mounting
plate.
A vertical mounting orientation is preferred for the ED07 pressure
regulator.
Abb. 5: Mounting orientation
19 Vertical axis
20 Horizontal axis
21
The device can be mounted in any orientation if the compressed air
is dry and oil-free.
19
a = ± ...90°
20
00122910