Aventics ED07 Mode D'emploi page 62

60 AVENTICS | ED07 | R41400766–BDL–001–AB
Assembling the ED07 pressure regulator
2
1
00125289
2
1
3
00125290
13
15
14
00121361
Table 6:
Rectangular X1S plug, form A
Pin 1
Pin 2
Pin
Rectangular X2A plug, form A
Pin 1
Pin 2
Pin 3
Pin
1)
The X1S
Make sure before connecting the plug that all seals and
connections are included and not damaged.
Only use pre-assembled plugs and cables.
Protect the supply voltage with an
For devices with an integrated
Use a shielded cable to connect the XPC.
The shield must be connected to the plug housing.
Connect the cable at the integrated
The ED07 pressure regulator can now be supplied with voltage
and controlled with a set point.
00121360
For devices with an integrated
socket, M12:
Use a shielded cable to connect the X2M.
The shield must be connected to the plug housing.
Connect the cables to the integrated
integrated
The ED07 pressure regulator can now be supplied with voltage
and controlled with a set point.
: ED07 pressure regulator with two DIN EN 175301-803
1)
rectangular plugs
0 V
24 V DC
FE
0 V
Set point (+): current 0/4 to 20 mA or
voltage 0 to 10 V DC
Actual value (+): current 0/4 to 20 mA or
voltage 0 to 10 V DC or
10 V DC constant
FE
pin 1 and X2A pin 1 contacts are connected internally.
X2M socket (15).
external M 2.5 A fuse.
XPC plug, M12:
XPC plug (13).
X1S plug, M12, and integrated
X1S plug (14) and
X2M