Ignition System Peak Voltage; Ignitor Ass'y Coil Resistance - SELVA MARINE Goldfish 4 Manuel D'entretien

ELEC
B W
IGNITION SYSTEM
B
W

IGNITION SYSTEM PEAK VOLTAGE

w
When checking the T.C.I. system do not
touch any of the connections of the digital
tester lead wires and high-tension cord.
1. Remove:
9 Spark plug cap
2. Disconnect:
9 Ignitor ass'y lead (W)
3. Measure:
9 Ignitor ass'y output peak voltage
Below specification ® Replace the or
check the ignitor ass'y.
Output peak voltage
V

Ignitor ass'y coil resistance

1. Remove:
9 Ignitor ass'y
2. Measure:
9 Ignitor ass'y coil resistance
Out of specification ® Replace.
Ignitor ass'y coil resistance:
Primary coil: 0.56 ~ 0.84 ½
Measuring steps:
8 Connect the pocket tester (½x1) to the
ignitor ass'y lead.
Primary:
Tester (+) lead ® White lead
Tester (-) lead ® Black lead
8-7
W-B
Cranking (300 r/min)
Opened
126
E