Service Points - SELVA MARINE Goldfish 4 Manuel D'entretien

POWR
THERMOSTAT
a

SERVICE POINTS

Thermostat inspection
1. Measure:
9 Valve operating temperature
Valve lift a
9
Out of specification ® Replace the
thermostat
Water temperature
Below
58 ~ 62°C (136.4 ~ 143.6°F)
Above
70°C (158°F)
Measuring steps:
8 Suspend the thermostat in a contain-
er filled with water.
8 Slowly heat the water.
8 Place a thermometer in the water.
8 While stirring the water, observe the
thermometer's indicated tempera-
ture.
Anode inspection
1. Inspect:
9 Anode
Refer to the "ANODE" in chapter 3.
5-23
E
Valve lift
0 mm
(0 in)
3 mm
(0.12 in)