SELVA MARINE Goldfish 4 Manuel D'entretien page 144

POWR
FLYWHEEL ROTOR ASS'Y
SERVICE POINTS
Flywheel rotor ass'y removal
1. Remove:
9 Rotor nut
9 Washer
9 Starter pulley
Flywheel holder:
90890-06522
cC
The major load should be applied in the
direction of the arrows. If the loads not
applied as shown, the flywheel holder
may easily slip off.
2. Remove:
Flywheel rotor ass'y
9
9 Woodruff key
Flywheel puller:
90890-06521
cC
9 Keep the nut side flush with the crank-
shaft end until the flywheel rotor ass'y
comes off the tapered portion of the
crankcase.
9 To prevent damage to the engine or
tools, screw in the universal-puller set
bolts evenly and completely so that the
universal puller plate is parallel to the fly-
wheel rotor ass'y.
5-9
E