Reversing function
The reversing function is designed to re-
lease food that has got stuck by briefly run-
ning the worm conveyor in reverse.
"Troubleshooting", Page 32
Note: The reversing function should only be
used with the meat mincer attachment.
Safety systems
Overload protection
The overload protection system prevents
the motor and other components from be-
ing damaged through being overloaded.
"Troubleshooting", Page 32
Thermal circuit breaker
If the motor becomes overloaded or too
hot, the thermal circuit breaker will switch
the appliance off.
Predetermined breaking point
If the worm conveyor jams or becomes
overloaded, the clutch will break at the pre-
determined breaking point.
Restart lock-out
Restart lock-out prevents your appliance
from automatically restarting processing
after a power failure.
The appliance is switched on again after a
power failure. Processing cannot start
again until the rotary switch has been set to
.
Operation
Operation
Cleaning the appliance and parts be-
fore using for the first time
1. Clean all parts that come into contact
with food before using for the first time.
2. Put the cleaned and dried parts out
ready for use.
Preparing the main unit
2
3
Fig.
-
Assembling the meat mincer attach-
ment
Fig.
4
-
7
Fitting the attachment
8
11
Fig.
-
Recommended speeds
Setting
Use
Meat mincer attachment (perfor-
ated discs 3 mm, 4.5 mm,
8 mm)
Sausage filler attachment
Kebbe attachment
Perforated discs
Perforated disc, fine (3 mm)
Perforated disc, medium (4.5 mm)
Perforated disc, coarse (8 mm)
Note: The coarse perforated disc
is suitable for processing chicken
bones.
Processing food
12
18
Fig.
-
Additional applications
You can combine accessories with parts of
the meat mincer attachment for additional
applications.
Note: Assemble the attachment for the indi-
vidual application you require. Use the pre-
pared attachment as described for the
meat mincer attachment.
"Fitting the attachment", Page 29
"Processing food", Page 29
Assembling the sausage filler attachment
The sausage filler attachment is suitable for
filling artificial and natural casings with
meat and for shaping rolls, e.g. cevapcici.
Fig.
19
-
22
Assembling the kebbe attachment
The kebbe attachment is suitable for shap-
ing dough or minced meat pockets.
23
25
Fig.
-
Assembling the cookie maker attachment
The cookie maker attachment is suitable for
shaping biscuit dough or shortcrust pastry.
26
29
Fig.
-
Shredding attachment
attachment
Shredding
The shredding attachment is suitable for
shredding, grating and slicing items such
Operation en
29