Publicité
Les langues disponibles
Les langues disponibles
5.6 - SELF-CLEANING CYCLE (Fig 5)
•
At the end of each working day, a self-cleaning cycle
shall be carried out before cutting off the oven.
•
Press the key
or
to reach a 400°C temperature.
•
Adjust ceiling capacity at 100% by operating the
the hand grip (1) or the key
key
(3) or
(4) (in case of ovens with digital
control elements).
•
Adjust the bedplate capacity at 100 % by operating
the hand grip (5) or the key
key
(3) or
(4) (in case of ovens with digital
control elements).
•
Leave the oven on for approximately twenty minutes,
then disconnect it to allow it to get cold.
5.7 - CUTTING OFF
•
At the end of each working day, cut off the oven by
pressing the push-button
• In the event the extractor hood is functioning, let it
function for the time needed to carry out a self-cleaning
cycle.
•
On restarting, the oven starts according to the data
being which were present before cutting it off.
EN - 22
and operate the key
(2) as well as the
(6) as well as the
.
MILLENIUM MM/MB
3
Functioning
FIG. 5
1
5
2
4
6
Publicité
