OEM MILLENIUM MM 435/D Mode D'emploi Et D'entretien page 51

5.2 - MANUAL OVEN CONTROL BOARD (Fig 2)
On the oven, there are the following control elements:
1. Line key ON/OFF
Pressing it, the display (2) lights up and the control
elements are energized.
2. Display
The set & real temperatures are displayed.
3. Handwheel opening/closing
By turning towards
by turning towards
4. Adjustment hand grip for bedplate resistance
capacity
By rotating the hand grip (4) clockwise, the bedplate
resistance percentage capacity is increased, coun-
terclockwise it is reduced.
5. Adjustment hand grip for ceiling resistance ca-
pacity
By rotating the hand grip (5) clockwise, the ceiling
resistance percentage capacity is increased, coun-
terclockwise it is reduced.
EN - 18
7
1
, the chimney damper opens;
, the chimney damper closes.
FIG. 2
6. Increment key
To increase the temperature value.
7. Decrement key
To reduce the temperature value.
8. Light button
Press the button to turn on the internal oven light.
Press the button again to turn off the light.
Temperature setting
The actual oven temperature is shown on the display
(2). To change the set temperature, press the
, button (the set temperature will be shown on the
display), then within 5 seconds press the
to increase or the
proximately 10 seconds from the temperature setting,
a temperature self-entering occurs and the real oven
temperature is displayed.
MILLENIUM MM/MB
Functioning
3
6
2
5
4
8
button to decrease it. After ap-
and
button