Publicité
INSTRUCTIONS FOR USE
HDS Operative Spar Cover
a. Attach the Operative Spar Cover (AR-6529-12) to the operative spar to cover
the operative joint of the spar shown. The pad is attached by covering the joint
with the pad oriented with the label facing towards the spar and fastening the
Velcro straps below the joint (A). Next engage the elastic Velcro straps to the
Velcro located on the side of the joint (B).
b. Finally bend the top portion of the spar cover over the top of the carbon fiber
shaft. Secure the Velcro so it goes underneath and around the spar to attach
back to the pad (C).
Document Number: 80028286
Version D
B
C
Fig: 8
A
Page 20
A
B
C
Ref Blank Template: 80025118 Ver. E
Issue Date: 31 MAR 2020
Publicité
