Alarm Management; Alarm Monitor; Alarm Types; Alarm Severity - JDSU OTU-8000 Manuel Utilisateur

Chapter 4 Web Interface
Exploitation

Alarm Management

Alarm monitor

Alarm types

Alarm severity

66
– Measurement
NOTE
This information may be viewed by everyone.
Tests and measurements can also be performed by everyone.
The Web Interface allows to access the OTU-8000 to view the local
alarm history and possibly carry out additional measurements.
Click on Alarm Monitor on the left menu to display the list of alarms
detected by the OTU-8000 and not sent to the ONMS.
Fig. 82
3 types of alarms are available:
– Unit: problem encountered with one of the OTU-8000 components
– Tested Fiber: alarms detected on the fiber
– Com: communication failures
Alarms offer different levels of severity:
NOTE
In the Alarm Monitor page, the different levels of severity are always
displayed at the bottom of the page.

Filters

By defaults, all alarm categories with all levels of severity are displayed.
To shorten the alarms list, you may apply filters.
User Manual
Alarms list
Severity
Critical
Major
Minor
Warning
Resolved
7OTU80010/06
Color
Red
Orange
Yellow
Blue
Green