General Display; Menu Frame; Configuration - JDSU OTU-8000 Manuel Utilisateur

Chapter 4 Web Interface

General display

General display

Menu frame

64
3 If necessary, notch Break user log to use the same log-in as
another user, at the same time.
4 Click on Submit.
The Configuration page, with the Ethernet tab selected, is displayed
by default.
The OTU-8000 web interface is divided into two frames:
– The left frame always displays a menu of different possible actions
(see "Menu frame" on page
– The main frame on the right displays interactive screens resulting
from the menu selection (see
Selected tab
Name of the OTU-8000
setup from the ONMS
Refresh the display
Available commands
Log-out the user
Information on the
software
Group of the
actual user
Left frame: Menu
Fig. 81 Screen general display
The left frame offers a menu with the following actions:
– Refresh
Requests newest information from the OTU-8000

– Configuration

Access to all configuration tabs (see
the Web Interface" on page
– Alarm monitor
Display the alarms which are not already sent to the ONMS (see
"Alarm Management" on page
– OTDR Links
View the status of all links and/or measure/test declared links (see
"Testing an OTDR link" on page 68
link" on page 69)
– Measurement
User Manual 7OTU80010/06
64).
"Main frame" on page
Other available tabs
Main frame: Interactive screen
"OTU-8000 Configuration via
36)
66)
and/or "Measuring an OTDR
65).