JDSU OTU-8000 Manuel Utilisateur page 68

Chapter 3 Installation of the OTU-8000
OTU-8000 and WEB Interface
54
Command cable OTU <-> OSU
(available in the Kit E98OTUXOSU)
UNPLUGGED FROM THE OTU-8000
Fig. 66 Connection OTU-8000 <-> OSX8000 and OSX8000 <->
OSX8000
b Affect the addresses for all the OSX8000 installed (see
uring the OSX8000" on page
The address of the first OSX8000 must follow the address of the
last OSU-9600.
Example: if two OSU-9600 are installed (with address 1 and 2),
enter the address 3 for the first OSX8000.
c Press F S
ULL CAN
4 If the Full scan is valid, connect the last OSU-9600 to the first
OSX8000 using the appropriate cable (E98OSUXOSX).
5 Connect the OTU-8000 to the OSU-9600 using the appropriate
cable (E98OTUXOSU)
User Manual 7OTU80010/06
50).
to check the addressing for all the OSX8000.
Command cable OSX <-> OSX
(Kit E98OSXXOSX)
Command cable OTU <-> OSX
(available in the Kit E98OTUXOSU)
"Config-