JDSU OTU-8000 Manuel Utilisateur page 35

Table 3 Description of the device status
Description
G
SERVER
R
- LAN
R
G
SERVER
- MODEM
R
G
STANDBY
G
B
G
POWER
B
O
LINK
Ethernet
B
Tx / Rx
G
G
TESTING
B
*: If the LEDs Unit, Test, Land and Modem are solid red and the LED
Standby is flashing green. the OTU-8000 encountered a serious
problem. It is in "RESCUE" mode. If after a restart it is still in the same
mode, please contact your service center.
User Manual 7OTU80010/06
Chapter 2 OTU-8000 General Description
The OTU-8000 is ready to communicate (or
is communicating) with the server, by the
LAN.
Last attempt to communicate with the server
via the LAN has failed
The OTU-8000 is setup with the factory
default IP address (192.168.1.1)
The OTU-8000 is currently communicating
with the server by modem.
The latest communication or test by modem
*
failed.
The OTU-8000 software is stopped, ready to
unplug.
Switch on or switch off process
The OTU-8000 software is running
The internal 12V power source is present
The internal 12V power source is missing
The Ethernet cable is connected and is work-
ing correctly
The Ethernet cable is unplugged or defective
Traffic is working correctly
The OTU-8000 is in acquisition mode
The OTU-8000 is not in acquisition mode
LEDs description
*
*
21