Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2 Follow the instructions displayed on the right of the screen:
a Press Settings button onto the OSX8000 front panel
The LED Addr. turns on, in solid green
b Enter the Address 1 for the first OSX8000 plugged (the
OSX8000 connected to the OTU-8000)
The addresses must be consecutive! (1, 2, 3, 4...).
c Press A
onto the OSU/OSX Setup page of the Web Inter-
PPLY
face.
d Confirm the address modification in the new dialog box pressing
OK.
Fig. 61
Apply a new address for the OSX8000
3 Once completed, and if the addres has been successfully modified:
– a green text confirm the address modification.
– the LED Addr. blinks in green onto the OSX8000
Confirmation of
the OSX address
modification
Fig. 62
OSX address successfully changed
4 Press back the Settings button onto the OSX8000 to complete the
configuration for the first OSX8000
5 Redo
step 2
to
4
for all the OSX8000 to be configured.
6 Once all the OSX8000 are configured, you must launch a scan to
detect all the connected OSX8000, clicking on the button F
S
.
CAN
7 Once scan is completed, the External Switches detection dialog box
is displayed with, for each OSX8000 address, its serial number and
C/P data.
User Manual
7OTU80010/06
Chapter 3 Installation of the OTU-8000
OTU-8000 and WEB Interface
b
c
d
2
ULL
51
Publicité
Chapitres
Table des Matières
