Configuration With Up To 16 Osu - JDSU OTU-8000 Manuel Utilisateur

Configuration with up to 16
OSU-9600 (Internal schematic
view from above)
C
Optical switch
module
Ports
1...48
1
Fig. 41 Configuration 1 x 96 to 1 x 128
Up to 16 OSU-9600 can be driven by one OTU-8000.
OSU
All the OSU-9600 must have the same number of ports.
1 Connect C1 from the first OSU-9600 to port 1 of the optical switch.
2 Connect C1 from the last OSU-9600 to the last port of the optical
switch.
3 Connect the optical switch to the first OSU, the first OSU to the
second one, the second one to the third one etc., using command
cables and power cables.
4 Connect all fibers to be tested from the ODF to each testing port on
the OTAU and each testing port of the OSU-9600.
OSU-9600 (Internal schematic
view from above)
Optical switch
module
Ports
1...64
1
Fig. 42 Configuration > 1x128
User Manual
C1
48
Optical Switch (Internal schemati, view from
C
Up to 16...
C1
64
Optical Switch (Internal schematic view from
above)
C
Optical switch module
1x2 ... 1x16
1
16
7OTU80010/06
Chapter 3 Installation of the OTU-8000
OSU-9600 additional hardware
OSU-9600 (Internal schematic
view from above)
C
Optical switch
module
Ports
1...48
1
48
above)
C
Optical switch
module
2
1 C1
OSU-9600 (Internal schematic
view from above)
C
Optical switch
module
Ports
1...64
1
64
OTDR
Optical patchcord
C1
C1
C1
39