Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Chapter 3 Installation of the OTU-8000
OTU-8000 and WEB Interface
Adding Remote Optical Switch
56
Fig. 69
Advanced mode for Single External Switch
Comon port C1
Fibers
Fig. 70
External Switch configuration
Configuring the Remote Optical Switch
1 Follow the same instructions as for an OTU-8000, to configure the
network information (see
2 Once you have the IP address for the Remote Switch, open the web
browser and type the IP address: http://xxx.xxx.xxx.xxx
(where xxx.xxx.xxx is the IP address)
3 In the Configuration menu, click on Ethernet tab and check infor-
mation, and if necessary modify it.
4 Click on A
to validate.
PPLY
5 Click on Admin, on the left menu.
6 Click on
Settings
tab
7 In the OTU Type parameter, select Remote Switch in the list.
User Manual
7OTU80010/06
"Default configuration" on page
44).
Publicité
Chapitres
Table des Matières
