Overall Dimensions Of The Otu-8000 In The Racks - JDSU OTU-8000 Manuel Utilisateur

Overall dimensions of the OTU-
8000 in the racks
If you wish to set and close a door on a 19'' or 23'' rack, replace the
milled screws with the countersunk ones:
1 Remove manually the milled screws from the cover
2 Use the screwdriver to fix the countersunk screws on the protection
cover.
NOTE
Using countersunk screws (M4) instead of milled screws decreases
the depth of the OTU-8000 from 9 mm. Use a POZI Screwdriver N°2.
Floor-space
240
Milled screws are used
72.2
Fig. 2 Rack 21'' (ETSI)
User Manual 7OTU80010/06
Chapter 1 Prerequisites and delivery of the OTU-8000
Prerequisites of the OTU-8000
3