Default Values; Configuring Otdr Plug-In(S) - JDSU OTU-8000 Manuel Utilisateur

Configuring OTDR plug-in(s)

Fig. 52 Modem test and log files
Check the quality of the network with a GSM Modem
Click on the Test button, on the line Network quality Test.
Once finished, the result for the network quality is automatically
displayed: the network quality (5/5: quality maximum) and the
phone supplier.
Fig. 53 Result of Network Quality Test
Restore Modem Configuration
If an error resulted from the test, you may go back to the default config-
uration by clicking on the
In the Configuration menu, click on the
The page displays:
– The configuration the OTU-8000 detected
Fig. 54 Module configuration screen when registered = detected
User Manual 7OTU80010/06
Chapter 3 Installation of the OTU-8000

Default Values

button.
Modules
OTU-8000 and WEB Interface
tab.
47