General Display; Menu Frame - JDSU OTU-8000 Manuel De L'utilisateur

Chapter 4 Operating the OTU-8000

General display

General display

Menu frame

48
The Configuration page, with the Ethernet tab selected, is displayed
by default.
The OTU-8000 web interface is divided into two frames:
– The left frame always displays a menu of different possible actions
(see "Menu frame" on page
– The main frame on the right displays interactive screens resulting
from the menu selection (see
Name of the OTU-8000
setup from the ONMSi
Refresh the display
Available commands
Log-out the user
Information on the
software
Group of the
actual user
Left frame: Menu
Fig. 59 Screen general display
The left frame offers a menu with the following actions:
– Refresh
Requests newest information from the OTU-8000
– Configuration
Access to all configuration tabs (see
the Web Interface" on page
– Alarm monitor
Display the alarms which are not already sent to the ONMSi (see
"Alarm Management" on page
– OTDR Links
View the status of all links and/or measure/test declared links (see
"Testing an OTDR link" on page 52
link" on page 53)
– Measurement
Request a measurement (see
fiber" on page 55)
– Supervision
Test IP answers (see
– Logs
User Manual 7OTU80050/01
48).
"Main frame" on page
Selected tab
Other available tabs
Main frame: Interactive screen
"OTU-8000 Configuration via
35)
50)
and/or
"Performing a measurement on a
"Supervision" on page
49).
"Measuring an OTDR
58)