Publicité
Les langues disponibles
Les langues disponibles
Chapter 1 Prerequisites and delivery of the OTU-8000
Delivery of the OTU-8000
Optical Switch module
Command cable OTU-8000 <-> OSX8000
(Length: 35 cm)
Connection to
the OSX8000
Command cable OSX8000 <-> OSX8000
(Length: 20 cm)
8
Do not use any converter or power cord other than those
supplied by JDSU as an option for the instrument.
The Optical Switch is already set into the OTU-8000, and the angled
jumper with correct connector is also delivered.
Optical Switch mounted into
the OTU-8000
Fig. 9
OSX8000
The external switch (EOSX8000) comes with the following elements::
– The external chassis
– The command cable OTU-8000 <-> OSX8000 (if it has been
ordered)
– The command cable OSX8000 <-> OSX8000 (if two OSX8000 or
more have been ordered).
– The jumper OTU-8000 <-> OSX8000
– The brackets for 21'' or 23'' rack (the brackets for 19'' rack are
already mounted onto the OSX8000)
– The screws kit to fix the OSX8000 into the rack.
NOTE
You must have a POZI screwdriver N°2 and thread lock to assure a
correct fixation.
Connection to the
OTU-8000
OSX8000 bracket for 23'' rack
Fig. 10
User Manual
Optical Switch module set into the OTU-8000 and angled
jumper
Connection to
the OSU-9600
OSX8000 bracket for
21'' rack
Delivery with OSX8000
7OTU80050/01
Angled Jumper with
the correct connector
OSX8000
Jumper OTU-8000 <-> OSX8000,
with the correct connector
(Length: 1m)
Publicité
Chapitres
