Installation Of The Otu-8000 Into The Rack; Fixing The Otu Into The Rack - JDSU OTU-8000 Manuel De L'utilisateur

Chapter 3 Installation of the OTU-8000

Installation of the OTU-8000 into the rack

Installation of the OTU-8000 into the rack

Fixing the OTU into the rack

22
Check first, you have all the following elements:
– the 19'' brackets
– the milled or countersunk screws according to the rack used and
the presence or not of a door on the rack (see
on page 2).
– the brackets corresponding to the rack used
The OTU-8000 is delivered in standard with the brackets for a 19'' rack.
If you have ordered another size of brackets, for 21 or 23'' rack, the
corresponding brackets will be delivered with the OTU-8000.
NOTE
Use a POZI Screwdriver N°1 to fix the brackets for a 21'' or 23'' rack.
Use a POZI Screwdriver N°2 to fix the brackets for a 19'' rack.
To set the new bracket on the rack:
1 Set the brackets for 19'', 21 or 23'' rack using the corresponding
screws (M6) and the rings delivered with the OTU-8000. Use a
POZI Screwdriver N°2.
Left bracket (when you are
facing the OTU)
Fixing brackets on the
rack (screws M6 and ring)
Fig. 18 Bracket adjustment for position into the rack
2 Set the OTU-8000 onto the brackets, into the rack.
User Manual 7OTU80050/01
"OTU-8000 and rack"
Indication for the bracket size and
position into the rack
Right bracket (when you are
facing the OTU)