Fixing The Osx8000 Into The Rack; Connecting The Osx8000 To The Otu-8000 - JDSU OTU-8000 Manuel De L'utilisateur

Chapter 3 Installation of the OTU-8000
OSX8000 additional optical switch

Fixing the OSX8000 into the rack

Connecting the OSX8000 to
the OTU-8000
28
4 Fix the brackets with the screws already used by the 19'' brackets
and use thread lock if necessary.
Once the correct brackets are set onto the OSX8000, you can install it
into the rack.
NOTE
Keep the screws and rings near the rack, for easier handling.
1 Set the OSX8000 into the rack, at the height wished
2 While one person maintain the module in position, the other one
screws it onto the rack.
1 Connect the OTU-8000 to one of the OSX8000, using a command
cable.
2 Connect this OSX8000 with the second one using the appropriate
cable (delivered when 2 OSX8000 or more are ordered).
NOTE
The OSX8000 may be mounted indifferently above or under the OTU-
8000 in a rack.
Connection to the OTU-8000
Fig. 28 2 OSX8000 modules connected to one OTU-8000
The common port is located on the left of the front panel.
Common port
Fig. 29 OSX8000 common and testing ports
User Manual 7OTU80050/01
Command cable
Kit E98OSXXOSX
Command cable
Kit E98OTUXOSX