Publicité
Les langues disponibles
Les langues disponibles
Chapter 4 Operating the OTU-8000
Exploitation
OTDR links status
Testing an OTDR link
52
Fig. 62
Alarm details and trace displayed
OTDR links can be tested or measured via the Web Interface
1 Click on OTDR Links on the left menu.
The list of OTDR links is displayed. For each link, the date of the
last test performed and the level of severity associated to the result
are displayed.
Fig. 63
List of OTDR links showing the level of severity
NOTE
In the OTDR Links page, the different levels of severity are displayed
at the bottom of the page. If the level of severity is green, no alarm
has been detected on the link.
NOTE
A no monitored link has the Warning level of severity by default.
1 Select from the list, the link to test.
2 Click on the Test tab and check Test.
3 Click on
Submit
to validate.
The list of available tests for the selected links is displayed.
4 Select which Test you wish to perform (as seen in
page
53).
User Manual
7OTU80050/01
Figure 64 on
Publicité
Chapitres
