Description And Use Of The Relay Option; Configuring The Otu-8000; Otu-8000 Login - JDSU OTU-8000 Manuel De L'utilisateur

Chapter 3 Installation of the OTU-8000

Description and use of the Relay option

Description and use of the Relay option
When the OTU-8000 is:
Off
Normal Conditions
System alarm
One Minor Alarm
One Major or Critical alarm
One Minor AND one Major
or Critical optical alarm

Configuring the OTU-8000

OTU-8000 login

34
NOTE
You may connect either end of the same launch fiber to the OTDR.
There are 3 relays, corresponding respectively to Unit alarm, major or
critical optical alarm and minor optical alarm.
Nominal switching capacity
Conductor cross section max.
Stripping length
Fig. 40 Relay option
The output contacts for relay alarms are working as follows:
Unit
(system alarm)
Open
Closed
Open
Closed
Closed
Closed
1 Plugging a PC (set in DHCP to obtain an IP automatically) to the
RJ45 labelled Local,
2 Press the button Local during few seconds until the LED Main
"Flashes"
3 Open your web browser http://192.168.1.1
4 Login as user install
User Manual 7OTU80050/01
1A @ 30VDC, 0.5A@125VAC
Min
(minor optical alarm)
Closed
Closed
Closed
Open
Closed
Open
1,5mm²
9 mm
Maj
(major/critical optical
alarm)
Closed
Closed
Closed
Closed
Open
Open