Connecting The Pneumatic Pressure Supply - Bosch Rexroth EQ 1/T Mode D'emploi

3 842 539 953/2013-07 | TS 1
Required accessories
• Two M5 throttle non-return valves
for inlet throttling.
Connect the compressed air

connections (see Fig. 12) to the
corresponding switching valve
(tubing: ø 4x1) via the throttle
non-return valves.
6.14

Connecting the pneumatic pressure supply

WARNING
High pneumatic pressure!
Danger of severe injuries or death.
Switch off the compressed air supply for the relevant system

component before pneumatically connecting, assembling or
disassembling the product.
Protect the system against being switched on.

Oiled or non-oiled, fi ltered, dry compressed air.

Operating pressure: 4 to 6 bar.
Fig. 12 Connecting the pneumatic pressure supply
Bosch Rexroth AG
4...6 bar
27/42
4...6 bar
539 953-11