Safety Instructions; About This Chapter; Intended Use - Bosch Rexroth EQ 1/T Mode D'emploi

3 842 539 953/2013-07 | TS 1
1.3.2 Symbols
The following symbols identify information that is not relevant for safety,
but which increases the comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
Failure to observe this information will result in suboptimal
product use/operation.
Individual, independent action.

1.
Numbered steps.
The numbers indicate the order for the steps.
2.
3.
• ... List format
• ...
2

Safety Instructions

2.1

About this chapter

The product has been manufactured according to the accepted rules of
current technology. Even so, there is a risk of injury or damage when using
the product if this chapter and the safety and warning information in these
instructions are not observed.
Read these instructions completely and thoroughly before working with

the product.
Keep these instructions in a location where they are accessible to all

users at all times.
Always include the operating instructions when you pass the product

on to third parties.
2.2

Intended use

This product is an incomplete machine (in accordance with the EU
Machinery Directive 2006/42/EC).
The product may be used as follows:
• For installation exclusively in a Rexroth TS 1 transfer system.
• For transporting WT 1 workpiece pallets.
• Maximum load: ≤ 30 kg
The product is intended for the industrial sector and not designed for
private use.
Intended use includes having read and understood these instructions,
especially the chapter "Safety Instructions".
Bosch Rexroth AG 7/42