Product Identifi Cation; Transport And Storage; Lifting And Positioning The Product; Storing The Electrical Transverse Conveyor Eq 1/T, Eq 1/Te - Bosch Rexroth EQ 1/T Mode D'emploi

14/42 Bosch Rexroth AG
1: Part number
2: Designation
3: Information about version and
dimensions
4.3 Product identifi cation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Fig. 3 Name plate
5

Transport and Storage

• Observe the transport instructions on the packaging.
• See the shipping documents for transport weight.
• Secure the product to prevent toppling!
• When storing and transporting the product, always observe the ambient
conditions specifi ed in the Technical Data (see page 42).
5.1

Lifting and positioning the product

WARNING
Lifted loads may fall!
Falling objects may result in severe injuries (or even death).
Always use lifting equipment with a suffi ciently high load bearing

capacity (see the shipping documents for product weight).
Before lifting the product, make sure that the carrying straps are

correctly fastened!
Secure the product to prevent toppling while lifting!

Make sure that no one is in the danger area when raising and

lowering, with the exception of the operator!
5.2 Storing the electrical transverse conveyor
EQ 1/T, EQ 1/TE
• Only store the product on a fl at surface.
• Observe the environmental conditions.
• For a belt section with an assembled motor:
Support the belt section so that there is no load on the motor.
TS 1 | 3 842 539 953/2013-07
1
. . . . . . . . . . . . . . . .
. . .
3
2
Typschild