Residual Hazards; Recommissioning After Shutdowns - Bosch Rexroth EQ 1/T Mode D'emploi

30/42 Bosch Rexroth AG
Location
1 Infeed point for conveyor
medium
2 Transverse connector; drive
shaft:
Between component and
workpiece pallet
3 Between workpiece pallet
and workpiece pallet
4
Infeed point for conveyor
medium
7.2

Residual hazards

Situation
Drawing in of clothing or
long hair
Catching of body parts
Catching of body parts
Drawing in of clothing or
long hair
1/4
3
7.3

Recommissioning after shutdowns

Follow the same procedure used for initial commissioning.
TS 1 | 3 842 539 953/2013-07
Hazard
Crushing;
tearing hair out
Cutting off
Crushing
Crushing;
tearing hair out
Measure
Do not reach into the system
during operation. Wear
suitable protective clothing.
Do not reach into the system
during operation.
Do not reach into the system
during operation.
Do not reach into the system
during operation. Wear
suitable protective clothing.
2
539 953-21