Bosch Rexroth EQ 1/T Mode D'emploi page 79

3 842 539 953/2013-07 | TS 1
1. Remove the cover plate on the
drive kit.
2. Remove the toothed drive belt
(F).
Mount the toothed drive belt and
the protective equipment in the
reverse sequence. Tension the
toothed drive belt (F) by shifting
the return roller in the slotted hole
of the holding plate.
9.4.4 Drive kit: exchanging the toothed drive belt
Fig. 15 Drive kit: exchanging the toothed drive belt
Bosch Rexroth AG 37/42
SW2,5
3
M = 2,5Nm
D
1
F
M
SW3
M = 2,5Nm
D
539 953-15