Maintenance; Repairs - Bosch Rexroth EQ 1/T Mode D'emploi

3 842 539 953/2013-07 | TS 1
9.3

Maintenance

9.3.1 Bearings
All bearings are provided with lifelong lubrication and are maintenance-free
under normal conditions.
9.3.2 Gears
The gear is maintenance-free.
9.3.3 Motor
To ensure adequate motor cooling, dirt and dust must be removed at
regular intervals from the:
• Motor surface
• Fan housing inlets
• Interior surfaces of the cooling fi ns
The cleaning intervals are based on the ambient conditions and operating
conditions.
9.3.4 Toothed transport belt
The transport side of the toothed belt is lightly lubricated on delivery to
increase the service life of the toothed belt. Apply subsequent lubrication
to the toothed belt if necessary by wiping a lightly oiled rag (mineral oil
viscosity 68 according to DIN, Aral/Shell) along the transport side of the
toothed belt.
9.4

Repairs

9.4.1 Required tools
• Hexagon wrenches (open-end) WS 8, WS 10, WS 13, WS 17, WS 19,
WS 24
• Hex socket wrenches WS 3, WS 4, WS 5, WS 6
9.4.2 Belt section: exchanging the motor and/or gear
How to exchange the motor and/or gear is described in the assembly
instructions for the BS 1 belt section, 3 842 522 488, and the BS 1/T belt
section, 3 842 522 489.
Bosch Rexroth AG 35/42