Wilo Stratos MAXO Notice De Montage page 39

en
150
Put into operation
Home screen
1 1.1
Radiator – Differential pressure Δp-v
Delivery head setpoint
Normal operation
3
Fig. 38: Home screen
Pos. Name
Main menu over-
1
view
Status area:
Error, warning or
process informa-
tion display
1.1
Title bar
2
Setpoint display
3
field
Setpoint editor
4
Active influences
5
Reset reference
6
Operating data and
7
measurement area
Context menu ref-
erence
8
Table 16: Home screen
If the Home screen is not displayed, press the
Back button for more than one second to open the Home screen.
All user interactions are initiated from the Home screen. The display returns to the
Home screen if the system is not operated for > 7 minutes.
The Home screen provides a comprehensive overview of the pump status.
2
The title bar indicates the currently active application and associated control mode.
2
Duty point:
Δp-v
Q =
H =
Measured values:
T fluid =
P electr. =
W electr.=
Further settings
4 5
Explanation
Selection of different main menus
Indicates an on-going process, warning or error message.
Blue: Process or communication status display (CIF mod-
ule communication)
Yellow: Warning
Red: Fault
Grey: There are no processes running in the background,
there are no warning or error messages.
Display of currently set application and control mode.
Displays currently configured setpoints.
Yellow frame: You have pressed the operating button to
open the setpoint editor and change the value.
Display of influences on set control mode
e.g. active setback operation, No-Flow Stop OFF (see
table entitled "Active influences"). You can display up
to five active influences.
Shows the value before having changed it when the set-
point editor is active.
The arrow shows that you can go back to the previous
value with the Back button.
Shows current operating data and measured values.
Offers context-related options in a separate context
menu.
icon in the main menu or hold the
6
7
10.3 m³/h
2.0 m
68.2 °C
160 W
42.0 kWh
8
WILO SE 2018-11